Complex for warming fluids and solutions in infusion therapy «AMPIRmini» with two external heat exchanger

Blood and Fluid Warmer. Prevention and treatment of hypothermia.
Maintaining set temperature during 24 h
Perform infusion therapy at low flow rate

Prevention and treatment of hypothermia and pre-, intra- and postoperative negative aftereffects. Uses during blood transfusion, infusion of blood and plasma, the injection of nutrient solutions via a nasal or enteral probes infusion therapy.

Using in the surgical wards and intensive care units.

Sheme

Fluid Warmer consists of:

1) Control unit

  • LED display  of current warming temperature
  • Separate control buttons
  • Various operating modes: in Manual mode the temperature is controlled in the range from 34°С to 42°С. In Auto mode the heat exchanger output temperature is maintained at 36.6°С
  • Sound and light warning, self-testing upon switching on and during operation

2) Two external heat exchanger

  • One or two infusion systems can be placed in one heat exchanger at the same time
  • It is placed in close proximity to the injection site, providing a minimum distance from the output of the heat exchanger to the patient
  • Maximum flow rate up to 520 ml/h (two infusion lines in the heat exchanger) or 900 ml/h (one infusion line in the heat exchanger)
  • Infusion lines of various diameters

3) Mounting

  • The device can be mounted on a stand  with the diameter of 15-55 mm
  • Secure non-slip mounting on a stand 
Specifications
  • Power supply
    230 ±23 V / 50 Hz
  • Average power consumption
    40 W/h
  • Temperature setting
    34°С to 42°С
  • Temperature accuracy
    0.1°С
  • Warming-up time to 37 ºC
    2 min
  • Continuous work time
    24 h
  • Type/class of protection against electric shock
    ВF/I
  • Ingress protection rating
    IP 23
  • Weight of AMPIRmini with two external heat exchanger
    approx. 2.1 kg
  • CE-marked
Get a quotation or advice on equipment
Similar products
Site menu