Stationary blood and fluid warmer in infusion therapy «AMPIRmini»

Compact warming device
Maintaining set temperature during 24 h
Perform infusion therapy at low flow rate

Prevention and treatment of hypothermia and pre-, intra- and postoperative negative aftereffects. Is used during blood transfusion, infusion of blood,  infusion therapy for children and adults, infusion of nutrient solutions through a nasal or enteral probes. 

Suitable for stationary conditions in the surgical wards and intensive care units.

Fluid warmer consists of

Fluid Warmer consists of:

1. Control unit

  • LED display  of current warming temperature
  • Separate control buttons
  • Various operating modes: in Manual mode the temperature is controlled in the range from 34°С to 42°С. In Auto mode the heat exchanger output temperature is maintained at 36.6°С 
  • Sound and light warning, self-testing upon switching on and during operation

2. Integrated heat exchanger

  • One or two infusion systems can be placed in one heat exchanger at the same time 
  • ​Maximum flow rate up to 520 ml/h (two infusion lines in the heat exchanger) or 900 ml/h (one infusion line in the heat exchanger)
  • Infusion lines of various diameters

3. Belt for fixing  

  • Mount the device using the fixing belt near the patient: on infusion stand or console, near the possible injection site with fastening to the patient or object, on which the patient is placed

The possibility of modifying an uninterruptible power supply - portable AMPIRmini.

Specifications
  • External power supply
    230 ±23 V / 50 Hz
  • Average power consumption
    30 W/h
  • Temperature setting
    34°С to 42°С
  • Temperature accuracy
    0.1°С
  • Warming-up time to 37 ºC
    2 min
  • Continuous work time
    24 h
  • Type/class of protection against electric shock
    ВF/I
  • Ingress protection rating
    IP 23
  • Weight of control unit with heat exchanger
    approx. 0.3 kg
  • CE-marked
    +
Get a quotation or advice on equipment
Site menu